Utilitzem galetes pròpies i de tercers per millorar els nostres serveis i mostrar contingut relacionat amb les seves preferències mitjançant l'anàlisi dels seus hàbits de navegació.
Si continua navegant, considerem que accepta el seu ús. Podeu canviar la configuració o obtenir més informació aquí.
Venda! Taulman Nylon 618 3D Filament 3mm Ampliar

Taulman Nylon 618 3D Filament 3mm


Nou producte

618 is currently being used by CNC shops around the world to support quick turn prototypes for Pre-Pilot and Pilot runs as well as some limited production runs.  As global supply compresses and just-in-time becomes just-a-little-late, more and more CNC shops are jumping in to fill quick turn needs.

Més detalls

1 Article

Atenció: Són els darrers en estoc!

21,76 €

-3,20 €

24,96 €

Més informació

1.  618 will not print/stick to glass or aluminum print tables.  The best table material for a new user is garolite (LE) available at McMaster Carr.
2.  618's bonding is best at a true 245C. 
3.  You may have heard nylon emits fumes.  618 does not emit any fumes for printing.  Actually, there is no odor at all from 618.  You may see what looks like puffs of smoke, but it is actually water vapor or steam.  If you are interested in seeing a full report on extruding Nylon based materials, please check this link as it's an extensive report used by all of industr
NOTE: Please make sure to dry the nylons if they've been left in any humidity at all (Including shipping).  All nylons will re-absorb humidity from the surrounding air within just 18 hr.  So , please make sure to store nylons, when not in use!

We have received confirmation emails from individual "users" that the following printers have had no issue printing 618 with only adding garolite, tape or wood to the print table