Nous utilisons cookies propres et le tiers pour améliorer nos services et de montrer le contenu lié à vos préférences en analysant leurs habitudes de navigation.
Si vous continuez la navigation, nous envisageons d'accepter son utilisation. Vous pouvez modifier les paramètres ou obtenir plus d'informations ici.

1 Watt Cool White LED - Heatsink Mounted Adafruit PID: 518

ADAF_0518

Neuf

Make a 1 Watt flashlight or a headlamp with this ultra-bright LED. The LED is very bright, with 90 Lumens in a 140 degree lambertian pattern. Compared to most LEDs, you would say this is 30,000 millicandela. Either way, its incredibly bright! The output is a 'cool' 6000K pure white, not a 'warm' incandescent-looking white.

Plus de détails

24 Produits

En stock

4,59 €

Remise sur la quantité

Quantité Remise Vous économisez
5 1% Jusqu'à 0,23 €
20 2% Jusqu'à 1,83 €
35 3% Jusqu'à 4,82 €
50 4% Jusqu'à 9,17 €
65 5% Jusqu'à 14,91 €
80 6% Jusqu'à 22,02 €
100 7% Jusqu'à 32,11 €

En savoir plus

  • The LED is mounted onto an aluminum PCB for heatsinking, and it also makes it easy to solder in. Simply connect to the big + and - pads on the PCB (there are two of each).

    The best way to drive these LEDs is constant current, @ 350 mA, but you can get away with under-driving for compactness. At about 3V, the LED draws ~200 mA, so connect two Alkaline batteries up directly with no resistor for a basic bright lamp. You can also try driving it directly with a 3.3V power supply, that will probably work OK as well (although its not ideal) - that's what we did when we made a vintage LED bike light using a 1W white LED.

  • TECHNICAL DETAILS