Utilitzem galetes pròpies i de tercers per millorar els nostres serveis i mostrar contingut relacionat amb les seves preferències mitjançant l'anàlisi dels seus hàbits de navegació.
Si continua navegant, considerem que accepta el seu ús. Podeu canviar la configuració o obtenir més informació aquí.
  • 3DSOMA - ODROID-C0

    ODROID-C0

    • • Amlogic ARMv7 Cortex-A5 1.5GHz quad core CPU
    • • Mali-450 MP2 GPU OpenGL ES 2.0/1.1
    • • 1GByte DDR3 SDRAM
    • • eMMC4.5 HS200 / MicroSD UHS-1 SDR50
    • • 40pin + 7pin GPIOs (unpopulated)
    • • USB 2.0 Host x 2 (unpopulated)
    • • Infrared(IR) Receiver (unpopulated)
    • • Li+ rechargeable battery charger
    • • Battery voltage level accessible via ADC
    • • DC/DC step-down converter for higher efficiency
    • • DC/DC step-up converter for 5V rails from Li-Po
    • • DIY friendly C0 Connector Pack is available

  • 3DSOMA - ODROID-C2

    ODROID-C2

    • • Amlogic ARMv8 Cortex-A53 2GHz 64bit quad core CPU
    • • Mali-450 GPU (3 Pixel processors + 2 Vertex shader processors)
    • • 2GByte DDR3 SDRAM
    • • Gigabit Ethernet
    • • HDMI 2.0 4K/60Hz display
    • • H.265 4K/60FPS and H.264 4K/30FPS capable VPU
    • • 40pin GPIOs + 7pin I2S
    • • eMMC5.0 HS400 / MicroSD UHS-1 SDR50
    • • USB 2.0 Host x 4, USB OTG x 1 (power + data)
    • • Infrared(IR) Receiver
    • • Included heat sink on board
    • • Power from USB OTG or DC barrel connector

  • 3DSOMA - ODROID-XU4

    ODROID-XU4

    • • Samsung Exynos5422 Cortex-A15 2GHz and Cortex-A7 octa core CPU
    • • Mali-T628 MP6OpenGL ES 3.0/2.0/1.1 and OpenCL 1.1 Full profile
    • • 2GByte LPDDR3 RAM PoP stacked
    • • Gigabit Ethernet
    • • HDMI 1.4a
    • • 30pin GPIOs + 12pin I2S
    • • eMMC5.0 HS400 / MicroSD UHS-1 SDR50
    • • 2 x USB 3.0 Host, 1 x USB 2.0 Host
    • • Active cooling fan mounted
    • • Power button
    • • 5V 4A PSU (5.5 mm barrel connector) included
    • • Size: 82 x 58 x 22 mm approx. (including cooling fan)

  • 3DSOMA - ODROID-C1+

    ODROID-C1+

    • • Amlogic ARMv7 Cortex-A5 1.5GHz quad core CPU
    • • Mali-450 MP2 GPU OpenGL ES 2.0/1.1
    • • 1GByte DDR3 SDRAM
    • • Gigabit Ethernet
    • • 40pin GPIOs + 7pin I2S
    • • eMMC4.5 HS200 / MicroSD UHS-1 SDR50
    • • USB 2.0 Host x 4, USB OTG x 1 (power + data)
    • • Infrared(IR) Receiver
    • • Included heat sink on board
    • • I2S bus to support HiFi audio add-on boards
    • • CEC function without RTC backup battery
    • • Power from USB OTG or DC barrel connector

  • 19,95 € En estoc
    Nou

    L'ABS (acrilonitril butadiè estirè) és un plàstic fort amb poca flexibilitat. Comunament s'utilitza en les indústries de disseny i enginyeria, tant per professionals com per particulars. L'ABS es pot extruir al voltant de 235ºC i requereix d'un llit calent per eliminar la deformació.

    19,95 €
    En estoc
  • 34,95 € En estoc
    Nou

    This lovely little shield is the best way to add a small, colorful and bright display to any project. We took our popular 1.8" TFT breakout board and remixed it into an Arduino shield complete with microSD card slot and a 5-way joystick navigation switch (with a nice plastic knob)!

    34,95 €
    En estoc
  • 44,95 € En estoc
    Nou

    Our best-selling PiTFT 2.8" display just got a fancy upgrade, now we have a version with a capacitive touchscreen! That's right, instead of a resistive touchscreen, which requires a fingernail or stylus, you can now use a fingerpad. The screen looks much nicer, with a black bezel and glass overlay.

    44,95 €
    En estoc
  • 114,95 € Disponible
    Nou

    Bitcoin Wallet. The original & most secure hardware wallet.

    114,95 €
    Disponible
  • 49,90 € En estoc
    Nou

    Powered by Imagination Arduboy is a miniature 8-bit game platform that makes it easy to learn, share and play open source games online. Make a game and carry it in your pocket!

    49,90 €
    En estoc
  • 34,50 € En estoc
    Nou

    645 is currently being used by CNC shops around the world to support quick turn prototypes for Pre-Pilot and Pilot runs as well as some limited production runs.  As global supply compresses and just-in-time becomes just-a-little-late, more and more CNC shops are jumping in to fill quick turn needs.

    34,50 €
    En estoc
  • 30,20 € En estoc
    Nou

    618 is currently being used by CNC shops around the world to support quick turn prototypes for Pre-Pilot and Pilot runs as well as some limited production runs.  As global supply compresses and just-in-time becomes just-a-little-late, more and more CNC shops are jumping in to fill quick turn needs.

    30,20 €
    En estoc
  • 1,45 € En estoc
    Nou

    Rodamientos MR105zz estánder se utilizan en las impresoras 3d para los extrusores o el movimiento de sus ejes.Medidas nominales:     Diámetro interior: 5mm     Diámetro exterior: 10mm     Grosor: 4mm

    1,45 €
    En estoc
  • 849,90 € Es pot reservar

    Una impressora DIY amb resultats professionals. La Hephestos estava basada en la Prusa i3, però amb aquesta nova versió hem evolucionat per oferir una impressora professional mantenint l'esperit original. Hem optat per un nou disseny amb el que aconseguim un major volum d'impressió de (x)210mm x (y)297mm x (z)220mm.

    849,90 €
    Es pot reservar
  • 7,45 € En estoc

    Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores.

    7,45 €
    En estoc
  • 36,20 € En estoc

    Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores.

    36,20 €
    En estoc
  • 1 690,00 € Es pot reservar

    We are evolving 3D printing. Witbox was our first 3D printer. It was ranked in the top five best printers in the world and reached more than 50 countries in just under a year. We have managed to create a more reliable, convenient and practical 3D printer. A ready-to-use printer that is perfect for working in domestic, professional and educational...

    1 690,00 €
    Es pot reservar
  • 209,00 € Es pot reservar

    Una elegant consola Arcade per a la teva Raspberry Pi

    209,00 €
    Es pot reservar
  • 61,50 € En estoc

    The ODROID-C1+ is esteemed to be the most powerful low-cost single board computer available, as well as being an extremely versatile device.

    61,50 €
    En estoc
  • 49,00 € En estoc

    The ODROID-C0 is a computer for those who wish to make a more flexible and portable applications. It is a minimized hardware version of the ODROID-C1+. Battery power circuit is fully integrated. Just attach a 3.7V Li+ battery and make it mobile. It is highly suitable for IoT projects, wearables, and other applications that require a lightweight device.

    49,00 €
    En estoc
  • 71,50 € Producte disponible amb diferents opcions

    The Cloudshell for XU4 is an affordable DIY Network Attached Storage (NAS) Solution to create your own personal cloud! It includes a color LCD console display on the front and has room for a 2.5inch HDD/SSD along with the XU4 board inside the CloudShell.

    71,50 €
    Afegir al carret Més
    Producte disponible amb diferents opcions
  • 72,50 € En estoc

    The ODROID-C2 is a 64-bit quad-core single board computer(SBC) that is one of the most cost-effective 64bit development boards available in the ARM world.

    72,50 €
    En estoc
  • 14,00 € Exhaurit

    IEEE 802.11b/g/n 1T1R WLAN module with Antenna. Android and Linux compatible.

    14,00 €
    Afegir al carret Més
    Exhaurit
  • 11,40 € En estoc

    Trinket's got a big sister in town - the Pro Trinket 5V! Pro Trinket combines everything you love about Trinket with the familiarity of the common core Arduino chip, the ATmega328. It's like an Arduino Pro Mini with more pins and USB tossed in, so delicious.

    11,40 €
    En estoc
  • 11,00 € En estoc

    Odroid dessigned these cases for those who appreciate the beauty of the naked PCB board, but still want to protect the ODROID-C2/C1+ from the dust and the elements. The semi-transparent case has openings for all outputs including the GPIO port making it a great fit for projects that are connected to external hardware.

    11,00 €
    En estoc
  • 9,95 € En estoc

    Unitat d'alimentació de la UE  per a ODROID-C1 + / C0 / C2 de 5V/2A.

    9,95 €
    En estoc
  • 79,95 € Exhaurit

    Ledger Nano S is a Bitcoin, Ethereum and Altcoins hardware wallet, based on robust safety features for storing cryptographic assets and securing digital payments. It connects to any computer (USB) and embeds a secure OLED display to double-check and confirm each transaction with a single tap on its side buttons.

    79,95 €
    Afegir al carret Més
    Exhaurit
  • 22,00 € En estoc

    El PLA (Àcid Polilàctic) és un material fort i rígid, que ofereix una alta resistència a la deformació, d'olor dolça, 100% biodegradable i compostable, s'ha convertit ràpidament amb el material d'impressió 3D preferit per la majoria d'usuaris. Es pot treballar entre 180º i 200º. Materia Prima: NatureWorks IngeoTM 3D850 PLA* Temperatura de extrusión...

    22,00 €
    En estoc
  • 9,50 € Producte disponible amb diferents opcions

    For those who wants to protect the ODROID-XU4 board from dust and the elements.

    9,50 €
    Afegir al carret Més
    Producte disponible amb diferents opcions
  • 49,50 € En estoc

    Preintalled OS, Ready to run out of the boxeMMC Version 5.0 interface or higher version from Samsung. JEDEC/MMCA version 5.0 : HS400 interface with 8bit DDR mode. Note! ODROID-C1 / C1+ / C0 host supports eMMC version 4.5The eMMC chipset is only compatible with Amlogic S905 and S805 series(ODROID-C1+ / C0 / C2)

    49,50 €
    En estoc
  • 56,00 € En estoc

    Preintalled OS, Ready to run out of the boxeMMC Version 5.0 interface or higher version from Toshiba or Sandisk. JEDEC/MMCA version 5.0 : HS400 interface with 8bit DDR mode.

    56,00 €
    En estoc
  • 99,95 € 135,35 € En estoc
    Oferta!

    The smallest computer in the world – the ultimate in sexy Put your laptop away. At 2” X 2” X 2”, the CuBox-i is the world’s smallest computer EVER. With its sleek and elegant design, the CuBox-i easily blends into your home or office décor. You’ll hardly notice it, but when you do, you’ll love the way it looks.

    99,95 € 135,35 €
    En estoc
  • 84,95 € 112,65 € En estoc
    Oferta!

    The smallest computer in the world – the ultimate in sexy Put your laptop away. At 2” X 2” X 2”, the CuBox-i is the world’s smallest computer EVER. With its sleek and elegant design, the CuBox-i easily blends into your home or office décor. You’ll hardly notice it, but when you do, you’ll love the way it looks.

    84,95 € 112,65 €
    En estoc
  • 83,95 € 112,65 € En estoc
    Oferta!

    The Base version of the HummingBoard carrier offers a usable and economical starting point for low-compute needs in an embedded device. The HummingBoard base focuses on file system being made exclusively available through a Micro-SD card slot together with the ability to do basic GPIO, media processing, and network connectivity.

    83,95 € 112,65 €
    En estoc
  • 69,99 € 101,35 € En estoc
    Oferta!

    The Base version of the HummingBoard carrier offers a usable and economical starting point for low-compute needs in an embedded device. The HummingBoard base focuses on file system being made exclusively available through a Micro-SD card slot together with the ability to do basic GPIO, media processing, and network connectivity.

    69,99 € 101,35 €
    En estoc
  • 22,00 € 44,65 € En estoc

    TPE filament is a flexible 3D printing material that feels and acts much like flexible rubber. TPE filament can be used to make parts that can bend or must flex to fit their environment: stoppers, belts, springs, phone cases, and more.

    22,00 € 44,65 €
    Preu reduït!
    En estoc

Seguiu-nos a Facebook

  • Pagament

    Transferència, targeta, PayPal o BitCoin

  • Enviament

    A tot el món amb número de seguiment

  • Contacta amb nosaltres

    Dilluns a Divendres 09:00-13:30 i 15:30-19:00

    Dissabtes 10:00-13:00

Payment options

3DSOMA

Idea, dissenya i solidifica. Creativitat digital i impressió 3D.

Impressió, escaneig, formació... Tenim tot el necessari per convertir-te en un maker.