The E3D V6 Hot End: Smaller, Easier, High Performance The E3D V6 is our...
Acoplador flexible de 5mm a 8mm, usado comúnmente como acoplador para el...
Acoplador flexible de 5mm a 5mm, usado comúnmente como acoplador para el...
Bowden tube connector 3mm (2.85mm)
Bowden tube connector 1.75mm
Mega 2560 R3 (Compatible) 16u2 Este se trata de un clon de gran calidad,...
Se usa para sistemas de extrusión basados en bowden.
Shield that translates digital commands to power command for the...
Si no trobes la pantalla que necessites, demana'ns ajuda a firstname.lastname@example.org.
Make a 1 Watt flashlight or a headlamp with this ultra-bright LED. The LED is very bright, with 90 Lumens in a 140 degree lambertian pattern. Compared to most LEDs, you would say this is 30,000 millicandela. Either way, its incredibly bright! The output is a 'cool' 6000K pure white, not a 'warm' incandescent-looking white.
This lovely little display breakout is the best way to add a small, colorful and bright display to any project.
This lovely little shield is the best way to add a small, colorful and bright display to any project. We took our popular 1.8" TFT breakout board and remixed it into an Arduino shield complete with microSD card slot and a 5-way joystick navigation switch (with a nice plastic knob)!
If you'd like a compact display, with buttons and a joystick - we've got what you're looking for.
Bring a little bit of Times Square into your home with this 16 x 32 RGB LED matrix panel. These panels are normally used to make video walls, here in New York we see them on the sides of busses and bus stops, to display animations or short video clips. We thought they looked really cool so we picked up a few boxes of them from a factory.
These LED panels take care of all the work of making a big matrix display. Each panel has six 8x8 red matrix modules, for a 16x24 matrix. The panel has a HT1632C chip on the back with does all the multiplexing work for you and has a 3-pin SPI-like serial interface to talk to it and set LEDs on or off (you cannot set the LED to be individually dimmed, as...
Bring a little bit of Times Square into your home with this sweet 32 x 32 square RGB LED matrix panel. These panels are normally used to make video walls, here in New York we see them on the sides of busses and bus stops, to display animations or short video clips. We thought they looked really cool so we picked up a few boxes of them from a factory.
For advanced NeoPixel fans, we how have a bendable, flexible 8x32 NeoPixel LED Matrix! Control all 256 ultra-bright LEDs using a single microcontroller pin, set each LED as you wish to scroll messages or draw little images. This matrix has a thick flexible PCB backing that can be gently bent and curved around surfaces
What's a wearable project without LEDs? Our favorite part of the Flora platform is these tiny smart pixels. Designed specifically for wearables, these updated Flora NeoPixels have ultra-cool technology: these ultra-bright LEDs have a constant-current driver cooked right into the LED package!
Sew a little sparkle into your wearable project with an Adafruit LED Sequin. These are the kid-sister to our popular Flora NeoPixel, they only show a single color and they don't have digital control, but that makes them smaller easier to use for many projects.
Add some dazzle to your Spark Core or Photon with this custom-made NeoPixel ring kit! 24 ultra bright smart LED NeoPixels are arranged in a circle with 2.6" (66mm) outer diameter. Make an Internet of Blinky! Each LED is addressable as the driver chip is inside the LED.
Aquest disseny actualitzat encaixa perfectament a les Pi models A +, B +, o Pi 2! També compta amb els 40 pins GPIO perquè pugui connectar un cable de 40 pins GPIO a sota.