Utilitzem galetes pròpies i de tercers per millorar els nostres serveis i mostrar contingut relacionat amb les seves preferències mitjançant l'anàlisi dels seus hàbits de navegació.
Si continua navegant, considerem que accepta el seu ús. Podeu canviar la configuració o obtenir més informació aquí.

Allo CAPACITANCE MULTIPLIER (Stand Alone)

ALLO_CM

Nou producte

A Capacitance Multiplier is designed to make a small capacitor function like a capacitor that is much, much larger. This design reduces the output ripple/noise of any PSU to almost negligible levels (less than 5mV up to 1Mhz).

Més detalls

2 Elements

Atenció: Són els darrers en estoc!

14,05 €

Descompte per volum

Quantitat Descompte Estalvieu
5 1% Fins a 0,70 €
20 2% Fins a 5,62 €
35 3% Fins a 14,75 €
50 4% Fins a 28,10 €
65 5% Fins a 45,66 €
80 6% Fins a 67,44 €
100 7% Fins a 98,35 €

Més informació

A Capacitance Multiplier is designed to make a small capacitor function like a capacitor that is much, much larger. This design reduces the output ripple/noise of any PSU to almost negligible levels (less than 5mV up to 1Mhz).

Note this is not a voltage regulator. The output voltage will track the input voltage (- dropout voltage).

This circuit is very suitable for class A and class D amplifiers or even to feed clean power to your SBCs.
Our CM board supports from 10V to 32V input @ 5 Amps.

Features

  • Supports from 10V to 32V input @ 5 Amps
  • Designed to make a small capacitor function like a capacitor that is much, much larger
  • Reduces the output ripple/noise of any PSU to almost negligible levels (less than 5mV up to 1Mhz)
  • The output voltage will track the input voltage (- dropout voltage)
  • Suitable for class A and class D amplifiers
  • Suitable to feed clean power to your SBCs
  • Dropout voltage is trim pot selectable
Technical Specifications
Min / Max 10V IN / 32V IN
Dropout Voltage Trim pot selectable from 0-3V (dropout voltage should always be higher than ripple / noise of PSU)
Factory Default 0.5V
Power Dissipation Dropout Voltage x A used = W of heat
PSRR 70db
Suitability This circuit is very suitable for class A and class D amplifiers or even to feed clean power to your SBCs
DC Connector Size 3mm x 7.3mm
Mating Plug Size 3mm x 6.5mm
Board Weight 120g

Accesoris