We use own and third party cookies to improve our services and show content related to your preferences by analyzing your browsing habits.
If you continue using our web, we will consider you accept the use of cookies. You can change the settings or get more information here.
  • 3DSOMA - ODROID-C0

    ODROID-C0

    • • Amlogic ARMv7 Cortex-A5 1.5GHz quad core CPU
    • • Mali-450 MP2 GPU OpenGL ES 2.0/1.1
    • • 1GByte DDR3 SDRAM
    • • eMMC4.5 HS200 / MicroSD UHS-1 SDR50
    • • 40pin + 7pin GPIOs (unpopulated)
    • • USB 2.0 Host x 2 (unpopulated)
    • • Infrared(IR) Receiver (unpopulated)
    • • Li+ rechargeable battery charger
    • • Battery voltage level accessible via ADC
    • • DC/DC step-down converter for higher efficiency
    • • DC/DC step-up converter for 5V rails from Li-Po
    • • DIY friendly C0 Connector Pack is available

  • 3DSOMA - ODROID-C1+

    ODROID-C1+

    • • Amlogic ARMv7 Cortex-A5 1.5GHz quad core CPU
    • • Mali-450 MP2 GPU OpenGL ES 2.0/1.1
    • • 1GByte DDR3 SDRAM
    • • Gigabit Ethernet
    • • 40pin GPIOs + 7pin I2S
    • • eMMC4.5 HS200  / MicroSD UHS-1 SDR50
    • • USB 2.0 Host x 4, USB OTG x 1 (power + data)
    • • Infrared(IR) Receiver
    • • Included heat sink on board
    • • I2S bus to support HiFi audio add-on boards
    • • CEC function without RTC backup battery
    • • Power from USB OTG or DC barrel connector

  • 3DSOMA - ODROID-C2

    ODROID-C2

    • • Amlogic ARMv8 Cortex-A53 2GHz 64bit quad core CPU
    • • Mali-450 GPU (3 Pixel processors + 2 Vertex shader processors)
    • • 2GByte DDR3 SDRAM
    • • Gigabit Ethernet
    • • HDMI 2.0 4K/60Hz display
    • • H.265 4K/60FPS and H.264 4K/30FPS capable VPU
    • • 40pin GPIOs + 7pin I2S
    • • eMMC5.0 HS400 / MicroSD UHS-1 SDR50
    • • USB 2.0 Host x 4, USB OTG x 1 (power + data)
    • • Infrared(IR) Receiver
    • • Included heat sink on board
    • • Power from USB OTG or DC barrel connector

  • 3DSOMA - ODROID-XU4

    ODROID-XU4

    • • Samsung Exynos5422 Cortex-A15 2GHz and Cortex-A7 octa core CPU
    • • Mali-T628 MP6OpenGL ES 3.0/2.0/1.1 and OpenCL 1.1 Full profile
    • • 2GByte LPDDR3 RAM PoP stacked
    • • Gigabit Ethernet
    • • HDMI 1.4a
    • • 30pin GPIOs + 12pin I2S
    • • eMMC5.0 HS400 / MicroSD UHS-1 SDR50
    • • 2 x USB 3.0 Host, 1 x USB 2.0 Host
    • • Active cooling fan mounted
    • • Power button
    • • 5V 4A PSU (5.5 mm barrel connector) included
    • • Size: 82 x 58 x 22 mm approx. (including cooling fan)

  • 98,95 € In stock
    New

    ODROID-XU4 is a new generation of computing device with more powerful, more energy-efficient hardware and a smaller form factor. Offering open source support, the board can run various flavors of Linux, including the latest Ubuntu 15.04 and Android 4.4 KitKat and 5.0 Lollipop.

    98,95 €
    In stock
  • 10,95 € In-stock
    New

    5V / 4A Power Supply EU Plug for ODROID-XU4.

    10,95 €
    In-stock
  • 17,95 € In stock
    New

    Just about all electronics use TTL serial for debugging, bootloading, programming, serial output, etc. But it's rare for a computer to have a serial port anymore. This is a USB to TTL serial cable, with a FTDI FT232RL usb/serial chip embedded in the head. It has a 6-pin socket at the end with 5V power and ground, as well as RX, TX, RTS and CTS at 3V logic...

    17,95 €
    In stock
  • 479,95 € Backorder available
    New

    Características: Volumen de impresión: 200x200x200 (XYZ). Velocidad de impresión máxima recomendada: 160x160x3 mm/s. Compatible con todos los filamentos de 1.75mm que imprimen por debajo de 300ºC. Resolución: 6,25 micrones en X e Y, 0.125 micrones en Z. Nozzles desde 0.2mm hasta 1mm (0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.80 y 1.00).

    479,95 €
    Backorder available
  • 24,15 € In Stock
    New

    While your 3D prints are rooted in technology they can have a more natural appearance when printed with our Laywoo-D3 wooden filament.

    24,15 €
    In Stock
  • 24,15 € In Stock
    New

    Give your custom designs a timeless quality by printing them with Laybrick stone filament. Architectural models, organic shapes, and replicas print well due to the near-zero warping. Paint, sand or grind the model or even vary the print temperature to achieve a smooth finish or a rough texture.

    24,15 €
    In Stock
  • 39,95 € In Stock
    New

    Power supply 12V 33A

    39,95 €
    In Stock
  • 3,75 € In Stock
    New

    Los muelles se usan en impresoras 3D por diferentes motivos.

    3,75 €
    In Stock
  • 849,90 € Backorder available

    A DIY printer with professional results. Hephestos is based on the Prusa i3. With the latest version, we have evolved it to create a professional printer, while maintaining the spirit of the original. We have opted for a new design that enables us to achieve a larger printing volume, reaching (X) 210mm x (Y) 297mm x (Z) 220mm. 

    849,90 €
    Backorder available
  • 7,45 € In stock

    A Feather board without ambition is a Feather board without FeatherWings! This is the Adalogger FeatherWing: it adds both a battery-backed Real Time Clock and micro SD card storage to any Feather main board. Using our Feather Stacking Headers or Feather Female Headers you can connect a FeatherWing on top of your Feather board and let the board take flight!

    7,45 €
    In stock
  • 36,20 € In stock

    Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores.

    36,20 €
    In stock
  • 1 690,00 € Backorder available

    We are evolving 3D printing. Witbox was our first 3D printer. It was ranked in the top five best printers in the world and reached more than 50 countries in just under a year. We have managed to create a more reliable, convenient and practical 3D printer. A ready-to-use printer that is perfect for working in domestic, professional and educational...

    1 690,00 €
    Backorder available
  • 209,00 € In stock

    A stylish, retro, and fun arcade cabinet for your Raspberry Pi.

    209,00 €
    In stock
  • 61,50 € Out of stock

    The ODROID-C1+ is esteemed to be the most powerful low-cost single board computer available, as well as being an extremely versatile device.

    61,50 €
    Add to cart More
    Out of stock
  • 49,00 € In stock

    The ODROID-C0 is a computer for those who wish to make a more flexible and portable applications. It is a minimized hardware version of the ODROID-C1+. Battery power circuit is fully integrated. Just attach a 3.7V Li+ battery and make it mobile. It is highly suitable for IoT projects, wearables, and other applications that require a lightweight device.

    49,00 €
    In stock
  • 71,50 € In stock

    The Cloudshell for XU4 is an affordable DIY Network Attached Storage (NAS) Solution to create your own personal cloud! It includes a color LCD console display on the front and has room for a 2.5inch HDD/SSD along with the XU4 board inside the CloudShell.

    71,50 €
    In stock
  • 72,50 € In Stock

    The ODROID-C2 is a 64-bit quad-core single board computer(SBC) that is one of the most cost-effective 64bit development boards available in the ARM world.

    72,50 €
    In Stock
  • 14,00 € In Stock

    IEEE 802.11b/g/n 1T1R WLAN module with Antenna. Android and Linux compatible.

    14,00 €
    In Stock
  • 11,40 € In Stock

    Trinket's got a big sister in town - the Pro Trinket 5V! Pro Trinket combines everything you love about Trinket with the familiarity of the common core Arduino chip, the ATmega328. It's like an Arduino Pro Mini with more pins and USB tossed in, so delicious.

    11,40 €
    In Stock
  • 11,00 € In Stock

    Odroid dessigned these cases for those who appreciate the beauty of the naked PCB board, but still want to protect the ODROID-C2/C1+ from the dust and the elements. The semi-transparent case has openings for all outputs including the GPIO port making it a great fit for projects that are connected to external hardware.

    11,00 €
    In Stock
  • 9,95 € In Stock

    5V/2A Power Supply EU Plug for ODROID-C1+ / C0 / C2

    9,95 €
    In Stock
  • 9,50 € In Stock

    For those who wants to protect the ODROID-XU4 board from dust and the elements.

    9,50 €
    In Stock
  • 22,00 € In Stock

    PLA (Poly-Lactic Acid) is a biodegradable polymer which is extruded from the starch of plants, such as corn, cassava, sugarcane, cereals, or sugar. It has gained popularity in the 3D printing sector. Materia Prima: NatureWorks IngeoTM 3D850 PLA* Temperatura de extrusión aproximada: 190º - 230ºC

    22,00 €
    In Stock
  • 49,50 € Out of stock

    Preintalled OS, Ready to run out of the boxeMMC Version 5.0 interface or higher version from Samsung. JEDEC/MMCA version 5.0 : HS400 interface with 8bit DDR mode. Note! ODROID-C1 / C1+ / C0 host supports eMMC version 4.5The eMMC chipset is only compatible with Amlogic S905 and S805 series(ODROID-C1+ / C0 / C2)

    49,50 €
    Add to cart More
    Out of stock
  • 108,50 € In Stock

    Preintalled OS, Ready to run out of the boxeMMC Version 5.0 interface or higher version from Toshiba or Sandisk. JEDEC/MMCA version 5.0 : HS400 interface with 8bit DDR mode.

    108,50 €
    In Stock
  • 9,50 € Out of stock

    Mediatek Ralink RT5370N  is a cost-effective, highly integrated USB Wi-Fi single chip containing an 802.11n MAC and baseband, a 2.4 GHz RF, PA, LNA and T/R switch on a single chip. It supports a 150 Mbps PHY data rate and fully complies with 802.11b/g/n specifications

    9,50 €
    Add to cart More
    Out of stock
  • 99,95 € 135,35 € In stock
    Sale!

    The smallest computer in the world – the ultimate in sexy Put your laptop away. At 2” X 2” X 2”, the CuBox-i is the world’s smallest computer EVER. With its sleek and elegant design, the CuBox-i easily blends into your home or office décor. You’ll hardly notice it, but when you do, you’ll love the way it looks.

    99,95 € 135,35 €
    In stock
  • 84,95 € 112,65 € In stock
    Sale!

    The smallest computer in the world – the ultimate in sexy Put your laptop away. At 2” X 2” X 2”, the CuBox-i is the world’s smallest computer EVER. With its sleek and elegant design, the CuBox-i easily blends into your home or office décor. You’ll hardly notice it, but when you do, you’ll love the way it looks.

    84,95 € 112,65 €
    In stock
  • 83,95 € 112,65 € In stock
    Sale!

    The Base version of the HummingBoard carrier offers a usable and economical starting point for low-compute needs in an embedded device. The HummingBoard base focuses on file system being made exclusively available through a Micro-SD card slot together with the ability to do basic GPIO, media processing, and network connectivity.

    83,95 € 112,65 €
    In stock
  • 69,99 € 101,35 € In stock
    Sale!

    The Base version of the HummingBoard carrier offers a usable and economical starting point for low-compute needs in an embedded device. The HummingBoard base focuses on file system being made exclusively available through a Micro-SD card slot together with the ability to do basic GPIO, media processing, and network connectivity.

    69,99 € 101,35 €
    In stock
  • 22,00 € 44,65 € In Stock

    TPE filament is a flexible 3D printing material that feels and acts much like flexible rubber. TPE filament can be used to make parts that can bend or must flex to fit their environment: stoppers, belts, springs, phone cases, and more.

    22,00 € 44,65 €
    Reduced price!
    In Stock

Follow us on Facebook

  • Payment

    Bank Wire, Credit Card or PayPal

  • Shipping

    World wide shipping with tracking number

  • Contact us

    Monday to Friday 9AM-1:30PM and 3:30PM-7PM

    Saturday 10AM-1PM

 

 

3DSOMA

Think, design and solidify. Digital creativity and 3D printing.

Print, scan, learn... We have everything you need to become a maker.