No products
New products
-
Adafruit Grand Central M4 Express featuring the SAMD51
Are you ready? Really ready? Cause here comes the Adafruit Grand Central...
27,89 € -
DIY USB Cable Parts - Straight Type C Plug
If you love DIY cable-rigging, then these USB adapters are right up your...
3,64 € -
Adafruit Metro Mini 328 - Arduino-Compatible - 5V 16MHz
The METRO Mini works great with the Arduino IDE, and runs the ATmega328P...
9,28 € -
JST PH 4-Pin to Female Socket Cable - I2C STEMMA Cable - 200mm
This cable will let you turn a JST PH 4-pin cable port into 4 individual...
1,12 € -
FTDI Serial TTL-232 USB Type C Cable - 5V Power and Logic
Just about all electronics use a UART serial port with RX and TX pins...
14,82 € -
FTDI Serial TTL-232 USB Type C Cable - 3V Power and Logic
Just about all electronics use a UART serial port with RX and TX pins...
14,82 € -
Allo There are 15 products.
-
14,05 € In StockAllo Acrylic Case For RPi + DigiOne...
Acrylic Case For RPi + DigiOne Signature (EU)
14,05 €In Stock -
37,19 € In StockAllo Aluminum Case For Sparky + Kali +...
Aluminum Case For Sparky + Kali + Piano 2.1 (EU)
37,19 €In Stock -
53,84 € Out of stockAllo Boss DAC
We all live in a society obsessed by brand names and the latest gadget. Sometimes with reason sometimes with none.The RPI has one major problem with audio. The clocks coming from CPU can only output one frequency clock perfect (very close), resulting in major problems with audio files sampled at 44Khz (and multiple). Too much jitter on i2s clocks. So we...
53,84 €Out of stock -
14,05 € In stockAllo CAPACITANCE MULTIPLIER (Stand Alone)
A Capacitance Multiplier is designed to make a small capacitor function like a capacitor that is much, much larger. This design reduces the output ripple/noise of any PSU to almost negligible levels (less than 5mV up to 1Mhz).
14,05 €In stock -
15,70 € In stockAllo Cheapo (S/PDIF Out + Headphone...
Add the Cheapo with S/PDIF Shield to your Sparky SBC for added functionality!
15,70 €In stock -
76,45 € In StockAllo Digione
We started designing a digital (S/PDIF) transport for RPI with one goal in mind: Absolut best S/PDIF output.
76,45 €In Stock -
60,58 € In stockAllo Kali (i2s Reclocker)
Every SBC has a crystal that it used to send digital signals to your DACs. The accuracy of this crystal is very important in how well the DAC will transform the digital signal into analog sounds. Simply put: a better crystal means a better sound! Most SBCs use a very cheap crystal with lots of jitter in order to save costs.
60,58 €In stock -
29,63 € In stockAllo miniBoss i2s dac for Raspberry PI Zero
There are many DACs for RPI Zero. Most of them low-priced, carbon copy of datasheet, slave DACs. We decided to do something different
29,63 €In stock -
41,28 € Out of stockAllo Piano 2.1 Hi-Fi DAC
Piano can work as a 2.0 (all frequencies are passed to LR) as a 2.2 (xover frequency is chosen in GUI) and subwoofer has 2 outputs or as a 2.1 (same as 2.2 but subwoofer is mono).
41,28 €Out of stock -
9,88 € Out of stockAllo Power supply
We had this power adapter made to specifications guaranteeing the lowest ripple and noise possible. This helps in the quest to achieve the highest possible sound quality. Includes interchangeable wall plug heads for US, EU and UK.
9,88 €Out of stock -
5,45 € In StockAllo Rainbow 32
The Allo Rainbow 32 is a small display for Raspberry Pi 3, 2, B +, A +, Zero and Zero W, consisting of 32 LEDs controlled by PWM via DMA.
5,45 €In Stock -
12,11 € In StockAllo Rainbow 64
The Allo Rainbow 64 is a display for Raspberry Pi 3, 2, B +, A +, Zero and Zero W, consisting of 64 LEDs controlled by PWM via DMA.
12,11 €In Stock