No products
BQ_H2+HB
New product
The Hephestos 2 is a DIY printer based on the Prusa i3, one of the most popular models in the RepRap community. This version has evolved toward a new metallic design, stabler and more stylish, which offers professional results while upholding the maker spirit. Its print volume is generously sized at (x)210mm x (y)297mm x (z)220mm.
Backorder available
Printer without PLA reel:
(x)450 x (y)516 x (z)571 mm (static)
(x)450 x (y)605 x (z)571 mm (dynamic)
Product with PLA reel:
(x)450 x (y)516 x (z)661 mm (static)
(x)450 x (y)605 x (z)661 mm (dynamic)
~16 Kg
Maximum: up to 200 mm/s (Subject to the materials, profiles and software used).
Power: 160W
Warmup time (50ºC): ~2min.
Warmup time (100ºC): ~11min.
Warmup time (110ºC): ~20min.
Maximum temperature: 110ºC
Maximum: 50 micras
Compatible operating systems: Windows XP or later, Linux and Mac OS X or later, Improved user interface, Marlin-derived firmware designed by BQ, New features: auto-levelling, manual levelling using inductive sensor exclusively designed for 3D printing, power-saver system, Recommended software environment: Cura Software, Slic3r
.gcode
100K thermistor on the hot-end, BQ Zum Inductive Sensor to aid levelling of the bed, BQ Zum LCD Smart Controller graphical interface, BQ Zum Mega 3D controller, Heater cartridge: 40 W, 12 V
Power supply 12V 100W
Grey
SD card reader, Type B micro-USB port
A4-sized tempered glass base, Cable chain, Flexible couplings for the screwed rods of the Z axis, Hard chromed bars for the Y axis, Lineal ball bearing for the Y axis, Powder-coated aluminium base and frame, Rapid system for changing print bed, Recirculating ball bearing guides with flat runner for the X and Z axes, Three-point printer base levelling system with damping
0.4 mm nozzle, for 1.75 mm filament
Own design extruder with Double Drive Gear traction setting and filament guide to maintain compatibility with flexible or soft filaments, Printed cooling blower, Hot-end designed for easy maintenance
Single
Heated bed kit
Assembly guide
Warranty and FAQ
Structural elements
4 GB SD card (with preloaded 3D example models)
5 spare PTFE tubes
2 cleaning needles
Spatula
Gloves
347x281x58 mm
1x Power supply 24V 160W
1x 5 pin right angle connector
1x EU AC cable 1m
4x Acrylic spacer
1x Control board
2x Screw M2.5x12 DIN912 zink
1xHeatbed PCB 220x305mm
8x Black bridle
1x Power cable 609mm
2x Clip to guide cables
1x Signal cable 650mm
15x Round bumper foot
Power: 160W
Warmup time (50ºC): ~2min.
Warmup time (100ºC): ~11min.
Warmup time (110ºC): ~20min.
Maximum temperature: 110ºC
1600 g