The E3D V6 Hot End: Smaller, Easier, High Performance The E3D V6 is our...
Acoplador flexible de 5mm a 8mm, usado comúnmente como acoplador para el...
Acoplador flexible de 5mm a 5mm, usado comúnmente como acoplador para el...
Bowden tube connector 3mm (2.85mm)
Bowden tube connector 1.75mm
Mega 2560 R3 (Compatible) 16u2 Este se trata de un clon de gran calidad,...
Se usa para sistemas de extrusión basados en bowden.
Shield that translates digital commands to power command for the...
HyperPixel is the perfect way to use your Pi without a bunch of cables or a bulky display. Design your own interface to control your projects or display your data, or turn your Pi into a tiny media centre.
Turn your Raspberry Pi into a retro games console! Picade HAT includes joystick and button inputs, a 3W I2S DAC/amplifier, and soft power switch. Nice!
A stylish and capable 3x16 character display with 3 RGB backlights to give you D.I.S.C.O capability. Since we had spare channels, we put in a handy 9-segment bar-graph for indicators. There's also a 4-direction joystick with a push button for navigation, and as usual, with full Pimoroni Python support so you can get up and running easily.
Break out a cold sweat with Drum HAT, an 8-pad Raspberry Pi drum-kit that lets your fingers think they're Stubblefield. Drum HAT is the much-requested companion to Piano HAT. It uses the same cap touch sensor to provide 8 finger-sized drum pads.
The PiGlow is a small add on board for the Raspberry Pi that provides 18 individually controllable LEDs. You can use it for all sorts of things! And of course, it fits inside a Pibow! Works just fine with all models of Raspberry Pi including the B+!
We’ve brought the much adored Parallax Propeller microcontroller to the Raspberry Pi in an experimentation-friendly HAT format that includes a mini breadboard for prototyping and breaks out a whole array of signals from both Pi and Propeller.
Control your Pi with a flick of the wrist. Skywriter HAT senses the position of your fingers in the air above. Using our Python API you can read off the positional data (x, y, z) and common gestures like flick left, tap, and double tap.
What's going to protect your beloved Raspberry Pi from an onslaught of rainbow-coloured fusion? That's right, it's the Unicorn HAT. Sporting a matrix of 64 (8 x 8) RGB LEDs and powered directly from the Pi this is the most compact pocket aurora available.
What's going to protect your beloved Raspberry Pi from an onslaught of rainbow-coloured fusion? That's right, it's the Unicorn pHAT. Compatible with Raspberry Pi 3, 2, B+, A+, and Zero. Sporting a matrix of 32 (8 x 4) RGB LEDs and powered directly from the Pi this is the most compact pocket aurora available.
The Raspberry Pi's very own touchscreen, mounted in your choice of colourful frame!