Preintalled OS, Ready to run out of the box
eMMC Version 5.0 interface or higher version from Samsung.
JEDEC/MMCA version 5.0 : HS400 interface with 8bit DDR mode.
Note! ODROID-C1 / C1+ / C0 host supports eMMC version 4.5
The eMMC chipset is only compatible with Amlogic S905 and S805 series(ODROID-C1+ / C0 / C2)
0 Item Items
This product is no longer in stock
Warning: Last items in stock!
Availability date: 05/02/2016
|5||1%||Up to 2,47 €|
|20||2%||Up to 19,80 €|
|35||3%||Up to 51,97 €|
|50||4%||Up to 99,00 €|
|65||5%||Up to 160,88 €|
|80||6%||Up to 237,60 €|
|100||7%||Up to 346,50 €|
|eMMC Module Reader is included
You need the above eMMC Module Reader to update the OS of the eMMC Module. Transcend USB multi-slot SD Card reader in the below picture is not included.
More about the eMMC Module : http://odroid.com/dokuwiki/doku.php?id=en:emmc_reference_chart
Storage I/O comparison
To obtain the results in the storage I/O comparison graph, type the following lines at a command prompt. The first command tests the write speed, and the second command tests the read speed:
$ dd if=/dev/zero of=test.tmp oflag=direct bs=500K count=1024
$ dd if=test.tmp of=/dev/null iflag=direct bs=500K count=1024
If you use the eMMC storage, you can get about two to three times faster storage I/O read performance. However, an affordable microSD UHS-1 card can still achieve reasonably fast speeds thanks to the advanced SD 3.01 host controller in the S805 processor. The MicroSD card read performance on C1+ is still about 1.7 times faster then RPi if you use the UHS-1 memory card.